×

NOTE: COVERCRAFT CUSTOM PRODUCTS CANNOT BE GUARANTEED IN TIME FOR CHRISTMAS DELIVERY

No Vehicle Selected
Select Vehicle
Select Your Vehicle to Shop for the Correct Parts:
Covercraft Front End Masks

Covercraft Front End Masks

Starting from $53.99 ea
Model: 3103559
This item is custom configured for your specific vehicle. Please select the Customize & Buy button below to start. Please Note: As these are custom items, they are not returnable and may take anywhere from 2 - 4 weeks to be manufactured.

Originally started in Germany for track testing vehicles off the production line, masks (also called "Bras") have long been considered a necessity for any car owner wanting to protect the area of the car that takes the most abuse on the road - the front end, especially the leading edge of the hood and any painted areas around the grille.

Quality features you'll find in every Covercraft mask:

  • Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface.
  • Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature.  Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature.
  • Reinforced air foils prevent flapping and lift.  Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks.
  • We use a micro-perforated finish on our vinyl.  It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather.  Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly.
  • Our heavy-gauge leather grain vinyl has a soft, protective backing.  We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask.
  • Seams are overlapped and finished with a strong, durable top stitch.  Edges are covered with soft, non-abrasive felt-rimmed bindings.

Multiple Styles to Choose From:

One-Piece Front Mask “M” Series
Covercraft masks give maximum protection with sporty good looks. Over 450 patterns for cars, vans and pickups. Custom tailored for an exact fit.

  • Independent headlight covers are featured on select models.
  • One-piece construction for easy installation and removal.
  • Maximum protection against nicks, scratches, stones and bugs.
  • Heavy gauge leather grain vinyl with soft, padded protective backing.
  • Durable, overlapped finished seams and non-abrasive felt-trimmed bindings.
  • Easy to install, with no tools or drilling required.

Custom Front Mask “MM” Series
More than 1,000 patterns designed to allow the hood to be opened with the mask in place. Available for cars, vans and pickups, these masks offer the same protection and good looks of our one-piece designs.  

  • Independent headlight covers are featured on select models.
  • Easy installation and removal.
  • Maximum protection against nicks, scratches, stones and bugs.
  • Heavy gauge leather grain vinyl with soft, padded protective backing.
  • Durable, overlapped finished seams and non-abrasive felt-trimmed bindings.
  • Easy to install, with no tools or drilling required.
  • Hood can be opened with the mask in place
  • Aerodynamic air foils prevent flapping or lift (where needed).

Deflector Protector® Hood Shield “MD/MH” Series
Custom-tailored to protect the front of the hood. At the top of the hood curve, we add a reinforced bug deflector to create a swirling wind action to help divert most bugs, dirt and debris away from the windshield.

  • Easy installation without tools, drilling or hardware.
  • Tough vinyl material has a soft fleeced backing.
  • Can be used in any weather, including sun, snow or rain.
  • Bug deflector is reinforced with styrene inserts.
  • Custom-tailored for most cars, vans and pickups

Custom Mini Mask “MN” Series
A smaller version of the popular Deflector-Protector®, Mini-Masks use reinforced air foils to prevent flapping and lift.

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Ask a question about Covercraft Front End Masks

Your Name:


Your Email:


Question: Note: HTML is not translated!

Enter the code in the box below:



Related Products
Shipped from Canada
No Brokerage or Duties
Canadian Owned
www.coveritcanada.ca 2017